Tag Archives: dc gear motor

China Good quality 12V 20rpm DC Gear Motor Planetary 36mm Gearbox gearbox engine

Product Description

A. Specification of 12V 20RPM DC Gear Motor Planetary 36MM Gearbox:

1. Voltage: 12/24V
2. Speed: 1.2-2000RPM
3. Torque: 0.2-50Kgf.cm
4. Output Power: 1-5W
5. Gearbox Ratio:  1:3.7 to 1: 3736
6. Gearbox Diameter: 36mm
7. Gearbox Length: 25.1-50.9mm
8. Motor Length: 29.1mm
9. Shaft Diameter: 8mm
10. Shaft Length: Customized

Note: The data sheet is only for reference, We can make the motor according to your requirement after Evaluation

How to calculate the motor with gearbox output specs?
1. Output Speed(No-load)=Motor Speed(No-load)/Reduction Ratio
2. Output Torque=Motor Torque*Reduction Ratio*Gearbox Efficiency
 
e.g.: 
PG36GR124500-19.2K
1. Output Speed(No-load)=4500/19.2=234RPM
2. Output Torque=67.6*19.2*81%=1051.3g.cm≈1kg.cm=0.1Nm (Should not be higher than Max. Gear Running Torque)

B. Company Capacity

HangZhou CHINAMFG Motor Co. Ltd is a manufacturer and exporter of various of motors with over 10 years experience.
Our product ranges include:
1) DC Brush motor: 6-130mm diameter, 0.01-1000W output power
2) DC Spur Gear Motor: 12-110mm diameter, 0.1-300W output power
3) DC Planeary Gear Motor: 10-82mm diameter, 0.1-100W output power 
4) Brushless DC Motor: 28-110mm, 5-1500W output power 
5) Stepper Motor: NEMA 08 to NEMA 43, Can with gearbox and lead screw
6) Servo Motor: 42mm to 130mm diameter, 50-4000w 
7) AC Gear Motor: 49 to 100mm diameter, 6-140 output power 

1. Production Line:

2. Testing Equipment:

3. Certificates:

4. Customer Visits:

6. FAQ:

Q: What’s your main products?
A:We currently produce Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q:How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed life time and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have customized service for your standard motors?
A:Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q:Do you have individual design service for motors?
A:Yes, we would like to design motors individually for our customers, but it may need some mould charge and design charge. 

Q:Can I have samples for testing first?
A:Yes, definitely you can. After confirmed the needed motor specs, we will quote and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed samples accordingly.

Q:How do you make sure motor quality?
A:We have our own inspection procedures: for incoming materials, we have signed sample and drawing to make sure qualified incoming materials; for production process, we have tour inspection in the process and final inspection to make sure qualified products before shipping.

Q:What’s your lead time?
A:Generally speaking, our regular standard product will need 25-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depends on the specific orders

Q:What’s your payment term?
A:For all our new customers, we will need 40% deposite, 60% paid before shipment.

Q:When will you reply after got my inquiries?
A:We will response within 24 hours once get your inquires.

Q:How can I trust you to make sure my money is safe?
A:We are certified by the third party SGS and we have exported to over 85 countries up to June.2017. You can check our reputation with our current customers in your country (if our customers do not mind), or you can order via alibaba to get trade assurance from alibaba to make sure your money is safe.

Q:What’s the minimum order quantity?
A:Our minimum order quantity depends on different motor models, please email us to check. Also, we usually do not accept personal use motor orders. 

Q:What’s your shipping method for motors?
A:For samples and packages less than 100kg, we usually suggest express shipping; For heavy packages, we usually suggest air shipping or sea shipping. But it all depends on our customers’ needs.

Q:What certifications do you have?
A:We currently have CE and ROSH certifications.

Q:Can you send me your price list?
A:Since we have hundreds of different products, and price varies per different specifications, we are not able to offer a price list. But we can quote within 24 hours once got your inquirues to make sure you can get the price in time.

Q:Can I visit your company?
A:Yes, welcome to visit our company, but please let us know at least 2 weeks in advance to help us make sure no other meetings during the day you visit us. Thanks!

Weclome contact with us if have any questions about this motor or other products!

Application: Universal, Household Appliances, Power Tools, Curtain and Others
Operating Speed: Low Speed
Function: Driving
Casing Protection: Open Type
Structure and Working Principle: Brush
Type: DC Gear Motor
Samples:
US$ 15/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

How to Choose the Right Gearbox for Your Machinery

Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:

  1. Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
  2. Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
  3. Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
  4. Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
  5. Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
  6. Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
  7. Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
  8. Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
  9. Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
  10. Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
  11. Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.

Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.

China Good quality 12V 20rpm DC Gear Motor Planetary 36mm Gearbox   gearbox engineChina Good quality 12V 20rpm DC Gear Motor Planetary 36mm Gearbox   gearbox engine
editor by CX 2023-12-12

China best 57bl Jk57bl01jsx92 Worm Gear Motor DC Electric Power Speed Reducer Gearbox for Concrete Mixer Machine gearbox drive shaft

Product Description

NEMA 23 BLDC Motor

 

General Specification:

/General Specification
(Item) (Specification)
Winding type Star
Hall effect angle 120 120 degree electrical angle
Shaft run out 0.571mm
Radial play 0.02mm@450g
End play 0.08mm@450g
Max.radial force 75N @20mm form the flange
Max.axial force 15N
Insulation class Class B
Dielectric strength 500VDC for 1 minute
Insulation resistance 100MΩ Min.,500VDC

Electrical Specification:
 

/Electrical Specification:    
    /Model
Specification Unit JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
Number Of Poles Poles 4
Rated Voltage VDC 36
Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
Rated Current Amps 1.2 2 3.6 5.3 6.8
Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.c 30 75 119 173 230
Body Length mm 37 47 67 87 107
Weight Kg 0.33 0.44 0.75 1 1.25
Sensor /Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH()
Working Environment (),,,,
Altitude 1000

Drawing:
 

 

1. who are we?

We are based in ZheJiang , China, start from 2011,sell to Domestic Market(26.00%),Western Europe(20.00%),North
America(20.00%),Northern Europe(10.00%),Eastern Europe(7.00%),Africa(5.00%),Southeast Asia(5.00%),Mid East(5.00%),South America(2.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?

We are based in ZheJiang , China, start from 2011,sell to Domestic Market(26.00%),Western Europe(20.00%),North
America(20.00%),Northern Europe(10.00%),Eastern Europe(7.00%),Africa(5.00%),Southeast Asia(5.00%),Mid East(5.00%),South America(2.00%). There are total about 51-100 people in our office.

3.what can you buy from us?

Always a pre-production sample before mass production;
Always final Inspection before shipment;

4. why should you buy from us not from other suppliers?

Professional one-to-1 motor customized . The world’s large enterprise of choice for high quality suppliers . ISO9001:2008 quality management system certification, through the CE, ROHS certification.

5. what services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,CAD,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese

Application: Universal, Household Appliances, Car
Operating Speed: Constant Speed
Excitation Mode: Excited
Function: Control
Casing Protection: Closed Type
Number of Poles: 8
Samples:
US$ 60/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

How to Calculate Gear Ratio in a Gearbox

Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:

Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear

Here’s a step-by-step guide on how to calculate gear ratio:

  1. Identify the input and output gears in the gearbox.
  2. Count the number of teeth on the output gear (the gear connected to the output shaft).
  3. Count the number of teeth on the input gear (the gear connected to the input shaft).
  4. Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
  5. Calculate the gear ratio by performing the division.

The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.

China best 57bl Jk57bl01jsx92 Worm Gear Motor DC Electric Power Speed Reducer Gearbox for Concrete Mixer Machine   gearbox drive shaft	China best 57bl Jk57bl01jsx92 Worm Gear Motor DC Electric Power Speed Reducer Gearbox for Concrete Mixer Machine   gearbox drive shaft
editor by CX 2023-10-04

China OEM 4.5 Volt Small DC Gearbox with Diameter 12mm Gear Motor High Performance gearbox design

Product Description

 

Product Parameters

Model No.: KM-13F050-63-12200

Size details:
Motor Diameter: φ12mm
Gear box length : 10mm
Shaft length: customization
Specifications:
Rated voltage: DC 2.5V
Direction of rotation: CW/CCW 
No load speed: 100rpm
No load current: 0.04A 
Rated torque: 540g.cm 
Rated speed: 80rpm

All technical data can custom made for different application.

Customized items:
DC motor, gearbox motor, vibration motor, automotive motor.
Accessories offered like encoder, gear,worm, wire, connector.
Ball bearing or Oil-impregnated bearing.
Shaft configuration(multi-knurls,D-cut shape, four-knurls etc).
Metal end cap or plastic end cap.
 Precious metal brush/ carbon brush.
Technical data.

Detailed Photos

Application

 

Certifications

Packaging & Shipping

Company Profile

Our Advantages

FAQ

1.What kind of motor do you supply?

Kinmore specializes in making DC motors & gear motors with the diameter ranging from 6mm-80mm; automotive motors and vibration motors are our strength area, too; we also provide brushless motors.
 

2.What’s the lead time for samples or mass production?

Normally, it takes 15-25 days to produce samples; about mass production, it will take 35-40 days for DC motor production and 45-60 days for gear motor production.
 

3.Could you mind sending the quotation for this motor?

For all of our motors, they are customized based on different requirements. We will offer the quotation soon after you send your specific requests and annual quantity.
 

4.Do you offer some kinds of accessories like encoder, PCB, connector, soldering wired for the motor?

We specialize in motors, instead of accessories. But if your annual demand reaches a certain amount, we will apply to the engineer for offering the accessories.

5.Are your motors certificated with UL, CB Tüv, CE?

All of our motors are UL, CB Tüv, CE compliant, and all our items are making under REACH and ROHS. We could provide motor’s exploring drawing and BOM for your products UL certificated. We also could make motors built-in filters based on your EMC directive for your EMC passing.

 

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Constant Speed
Excitation Mode: Compound
Function: Control, Driving
Casing Protection: Open Type
Number of Poles: 2
Customization:
Available

|

Customized Request

gearbox

Is it Better to Repair or Replace a Damaged Gearbox?

Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:

  • Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
  • Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
  • Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
  • Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
  • Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
  • Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
  • Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.

Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.

China OEM 4.5 Volt Small DC Gearbox with Diameter 12mm Gear Motor High Performance   gearbox design		China OEM 4.5 Volt Small DC Gearbox with Diameter 12mm Gear Motor High Performance   gearbox design
editor by CX 2023-09-30

China high quality Robot 50rpm 12V 76mm DC Brushed Motor Permanent Magnet with Worm Gear Box with Hot selling

Product Description

BG 76ZYT DC Brushed Motor 
Environmental Conditions -20ºC~50ºC
Insulation Clase B
Protection class IP44
Noise ≤65dB
Self-Locking Function YES
Lifespan >1000h

 

Electrical Specifications
Model RATED LOAD NO LOAD   STALL
 Voltage    Power  

  Speed  

Gear Ratio

 Torque    Current   Speed    Current   Torque   Current 
V W rpm 1:xx N.m A rpm A   N.m   A  
BG-76ZYT  12 90 50 1:60 12 7.5 60 0.5 / /
BG-76ZYT-1 24 100 45 1:60 15

4.0

55 0.5 / /
BG-76ZYT-2 48 120 30 1:60 20 3.0 40 0.6 / /
We can also customize products according to customer requirements.  

Established in 1994, HangZhou BG Motor Factory is a professional manufacturer of brushless DC motors, brushed DC motors, planetary gear motors, worm gear motors, Universal motors and AC motors. We have a plant area of 6000 square meters, multiple patent certificates, and we have the independent design and development capabilities and strong technical force, with an annual output of more than 1 million units. Since the beginning of its establishment, BG motor has focused on the overall solution of motors. We manufacture and design motors, provide professional customized services, respond quickly to customer needs, and actively help customers to solve problems. Our motor products are exported to 20 countries, including the United States, Germany, Italy, the United Kingdom, Poland, Slovenia, Switzerland, Sweden, Singapore, South Korea etc.
Our founder, Mr. Sun, has more than 40 years of experience in motor technology, and our other engineers also have more than 15 years of experience, and 60% of our staff have more than 10 years of experience, and we can assure you that the quality of our motors is top notch.
The products cover AGV, underwater robots, robots, sewing machine industry, automobiles, medical equipment, automatic doors, lifting equipment, industrial equipment and have a wide range of applications.
We strive for CZPT in the quality of each product, and we are only a small and sophisticated manufacturer.
Our vision: Drive the world CZPT and make life better!

Q:1.What kind of motors can you provide?

A:At present, we mainly produce brushless DC motors, brush DC motors, AC motors, Universal Motors; the power of the motor is less than 5000W, and the diameter of the motor is not more than 200mm;

Q:2.Can you send me a price list?

A:For all of our motors, they are customized based on different requirements like lifetime, noise,voltage,and shaft etc. The price also varies according to annual quantity. So it’s really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we’ll see what offer we can provide.

Q:3.Can l get some samples?

A:It depends. If only a few samples for personal use or replacement, I am afraid it’ll be difficult for us to provide because all of our motors are custom made and no stock available if there are no further needs. If just sample testing before the official order and our MOQ,price and other terms are acceptable,we’d love to provide samples.

Q4:Can you provide OEM or ODM service?

A:Yes,OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.

Q5:Can l visit your factory before we place an order?

A:welcome to visit our factory,we are very pleased if we have the chance to know each other more.

Q:6.What’s the lead time for a regular order?

A:For orders, the standard lead time is 15-20 days and this time can be shorter or longer based on the different model,period and quantity.

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Robot Arm
Operating Speed: Low Speed
Excitation Mode: DC
Function: Driving
Casing Protection: Closed Type
Number of Poles: Can Be Choosen
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Benefits of Regular Gearbox Maintenance

Regular maintenance of gearboxes offers numerous advantages:

  • Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
  • Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
  • Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
  • Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
  • Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
  • Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
  • Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
  • Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
  • Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.

Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.

China high quality Robot 50rpm 12V 76mm DC Brushed Motor Permanent Magnet with Worm Gear Box   with Hot selling		China high quality Robot 50rpm 12V 76mm DC Brushed Motor Permanent Magnet with Worm Gear Box   with Hot selling
editor by CX 2023-08-30

China manufacturer DC Motor Electrical Motor Dcr6034 with Gear Box for Automatic Door with Hot selling

Product Description


PROFESSIONAL MANUFACTURER OF SINGLE-PHASE SERIES MOTOR /GEAR MOTOR

Power,Speed,Torque,Shaft ,Stator Lamination,Rotation And Installing Location 
can be customized according to customers requirements.

Product Description:

Product Name: DC Geared Motor
Model No. DCR60-34
Brand: HangZhouA
Application: for Standing desk/adjustable desk/Juicer/Door opener
Starting Mode Direct on-line Starting
Rated Voltage: DC 24V
Rated Power: 40W
No-load Power: 36W±10%
Rated Speed: 80rpm±10%
No-load Speed: 102rpm±10%
Gear Ratio: 39:1
Rated Torque: 2.0N.m
No-load Current: 1.7A±10%
No-load Spark: Class≤2
Withstand Voltage: 1750V/1sec/5mA
Output Bearing: Ball Bearing
Out-axis Diam: ø6.8
Customized: yes
Packing: foam&carton,or accroding to customers’ specific requirements
MOQ: 500 pcs
Delivery Time: Depends on quantity from 2 weeks to 4 weeks.
Payment Term: T/T, L/C, D/P

Remarks:

  1. The performances as above are just for reference only. We can adjust our motor specifications according to customer’s requirements.
  2. OEM & ODM are both available. Please feel free to contact us with your detailed requirements .
  3. If ask for quotation, please tell voltage, draft, input power, air flow at least, so we could quote quickly.

Detail View:

Assembly Drawning:

Brief Introduction

HangZhou Xihu (West Lake) Dis. HangZhoua Electric Machinery Factory was established in 1997, it is located in Xihu (West Lake) Dis. District of HangZhou, ZHangZhoug Province.We have about 50,000 square CZPT of the building and nearly 300 employees. In addition, the transportation around the factory is very convenient, it is close to the TongSan Highway, and is just 8 kilometers away from the HangZhou Airport.

Through years of accumulation and development, our factory is now a professional manufacturer of single-phase series motor and gear reducer motor.The application of our product covers many fields,it is mainly used in home kitchen appliances or electric tools, such as juicer, ice crusher, meat grinder, coffee bean grinder , lawn mower and so on.

Our factory has advanced universal motor production line, strong technical force, perfect testing means, products can be produced according to international and domestic standards, but also according to customer requirements or provided samples, drawings and other special design.Our work sticks to the principle of striving for existence by fine quality. Our products sell far all over the world.Our factory will, and as always, wholeheartedly serves broad old and new customers both at home and abroad. We are looking CZPT to establishing business relationships with customers all over the world.

FAQ:
Q1: Are you a trade company or a manufacturer?
A1: HangZhou Xihu (West Lake) Dis. HangZhoua Motor Manufactory was established in 1997, we are a professional
       manufacturer of single-phase series motor and gear motor.
Q2: How about sample and charge?
A2: Our sample policy stipulates that customers must pay for sample and express fee,but we could  
        return  the sample and express fee based on certain order quantity. You can specify the express               company you want that like DHL, or you can call your courier to pick up from our factory.
Q3: What is your payment terms?
A3: 1. We accept T/T, D/P, L/C at sight.
      2. 30% deposit in advance and 70% balance before shipment.(Amount more than 3000USD)
Q4: How can we get detailed price?
A4: Please offer us detailed information of the product,specific packaging requirements and purchasing  
         quantity.
Q5: Is it possible to visit your factory
A5: Sure. But please kindly keep us posted a few days in advance. We need to check our schedule to see if            we are available then.
Q6: How to guarantee punctual shipment for my order?
A6: We give priority to export orders and keep updating progress from production to delivery.
Q7: What about the after-sales service? 
A7: Through emails, pictures or guest samples to confirm the real cause of the problem. If there is really
         a product problem, we will redo with no charge.
Q8: What is your delivery date?
A8: The delivery date is about 20-30 days after receiving your deposit,it depends on the quantity you
       order. 

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Excited
Function: Driving
Casing Protection: Protection Type
Number of Poles: 2
Samples:
US$ 10.00/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Is it Better to Repair or Replace a Damaged Gearbox?

Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:

  • Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
  • Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
  • Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
  • Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
  • Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
  • Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
  • Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.

Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.

China manufacturer DC Motor Electrical Motor Dcr6034 with Gear Box for Automatic Door   with Hot selling		China manufacturer DC Motor Electrical Motor Dcr6034 with Gear Box for Automatic Door   with Hot selling
editor by CX 2023-08-25

China Good quality DC Electric Motor Dcr6034 Door Closer/Automatic Door Motor with Gear Box cvt gearbox

Product Description


PROFESSIONAL MANUFACTURER OF SINGLE-PHASE SERIES MOTOR /GEAR MOTOR

Power,Speed,Torque,Shaft ,Stator Lamination,Rotation And Installing Location 
can be customized according to customers requirements.

Product Description:

Product Name: DC Geared Motor
Model No. DCR60-34
Brand: HangZhouA
Application: for Standing desk/adjustable desk/Juicer/Door opener
Starting Mode Direct on-line Starting
Rated Voltage: DC 24V
Rated Power: 40W
No-load Power: 36W±10%
Rated Speed: 80rpm±10%
No-load Speed: 102rpm±10%
Gear Ratio: 39:1
Rated Torque: 2.0N.m
No-load Current: 1.7A±10%
No-load Spark: Class≤2
Withstand Voltage: 1750V/1sec/5mA
Output Bearing: Ball Bearing
Out-axis Diam: ø6.8
Customized: yes
Packing: foam&carton,or accroding to customers’ specific requirements
MOQ: 500 pcs
Delivery Time: Depends on quantity from 2 weeks to 4 weeks.
Payment Term: T/T, L/C, D/P

Remarks:

  1. The performances as above are just for reference only. We can adjust our motor specifications according to customer’s requirements.
  2. OEM & ODM are both available. Please feel free to contact us with your detailed requirements .
  3. If ask for quotation, please tell voltage, draft, input power, air flow at least, so we could quote quickly.

Detail View:

Assembly Drawning:

Brief Introduction

HangZhou Xihu (West Lake) Dis. HangZhoua Electric Machinery Factory was established in 1997, it is located in Xihu (West Lake) Dis. District of HangZhou, ZHangZhoug Province.We have about 50,000 square CZPT of the building and nearly 300 employees. In addition, the transportation around the factory is very convenient, it is close to the TongSan Highway, and is just 8 kilometers away from the HangZhou Airport.

Through years of accumulation and development, our factory is now a professional manufacturer of single-phase series motor and gear reducer motor.The application of our product covers many fields,it is mainly used in home kitchen appliances or electric tools, such as juicer, ice crusher, meat grinder, coffee bean grinder , lawn mower and so on.

Our factory has advanced universal motor production line, strong technical force, perfect testing means, products can be produced according to international and domestic standards, but also according to customer requirements or provided samples, drawings and other special design.Our work sticks to the principle of striving for existence by fine quality. Our products sell far all over the world.Our factory will, and as always, wholeheartedly serves broad old and new customers both at home and abroad. We are looking CZPT to establishing business relationships with customers all over the world.

FAQ:
Q1: Are you a trade company or a manufacturer?
A1: HangZhou Xihu (West Lake) Dis. HangZhoua Motor Manufactory was established in 1997, we are a professional
       manufacturer of single-phase series motor and gear motor.
Q2: How about sample and charge?
A2: Our sample policy stipulates that customers must pay for sample and express fee,but we could  
        return  the sample and express fee based on certain order quantity. You can specify the express               company you want that like DHL, or you can call your courier to pick up from our factory.
Q3: What is your payment terms?
A3: 1. We accept T/T, D/P, L/C at sight.
      2. 30% deposit in advance and 70% balance before shipment.(Amount more than 3000USD)
Q4: How can we get detailed price?
A4: Please offer us detailed information of the product,specific packaging requirements and purchasing  
         quantity.
Q5: Is it possible to visit your factory
A5: Sure. But please kindly keep us posted a few days in advance. We need to check our schedule to see if            we are available then.
Q6: How to guarantee punctual shipment for my order?
A6: We give priority to export orders and keep updating progress from production to delivery.
Q7: What about the after-sales service? 
A7: Through emails, pictures or guest samples to confirm the real cause of the problem. If there is really
         a product problem, we will redo with no charge.
Q8: What is your delivery date?
A8: The delivery date is about 20-30 days after receiving your deposit,it depends on the quantity you
       order. 

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Excited
Function: Driving
Casing Protection: Protection Type
Number of Poles: 2
Samples:
US$ 10.00/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China Good quality DC Electric Motor Dcr6034 Door Closer/Automatic Door Motor with Gear Box   cvt gearbox	China Good quality DC Electric Motor Dcr6034 Door Closer/Automatic Door Motor with Gear Box   cvt gearbox
editor by CX 2023-07-13

China wholesaler Shunli Customizable Small Dc Gear Motor 13mm 25Rpm 30Rpm 60Rpm Low Rpm 12v Gear Motor With Gearbox Reducer with Best Sales

Warranty: 3months-1year
Model Number: GM13RM030/050, GM13RM030/050
Usage: BOAT, Car, Electric Bicycle, FAN, Home Appliance, Shunli Customizable Small Dc Gear Motor 13mm 25Rpm 30Rpm 60Rpm Low Rpm 12v Gear Motor With Gearbox Reducer
Type: GEAR MOTOR
Torque: Customized
Construction: Permanent Magnet
Commutation: Brush
Protect Feature: Totally Enclosed
Speed(RPM): Customized
Continuous Current(A): 75-200mA
Efficiency: 75%
weight: 23.0g
no load current: 20-35mA
speed: 27-3000rpm
Rated Voltage: 3-12v
brush: carbon or metal
End play: Max 0.3mm
shaft: customized
Size: 15.5*12.0*29.5mm
Max momentary tolerance torque: 0.05-3kg.cm
Packaging Details: Shunli Customizable Small Dc Gear Motor 13mm 25Rpm 30Rpm 60Rpm Low Rpm 12v Gear Motor With Gearbox ReducerPoly foam inside, strong export carton box outside, with pallet, or as the customer wished.

Shunli Customizable Small Dc Gear Motor 13mm 25Rpm 30Rpm 60Rpm Low Rpm 12v Gear Motor With Gearbox Reducer Product Details

Motor Customized Specification, Please Contact Us.

Reference Drawing

——GM13RM030

——GM13RM050

Reference Datasheet

Gearbox Technical Date
Number of stages245Ratio3K / 7K / 10K16K/17K/20K/30K/35K/50K/63K/70K/86K115K/150K/210K/250K/360KMax. Rated Torque200 gf.cm600 gf.cm1000 gf.cmMax. Gear Breaked Torque600 gf.cm1500 gf.cm2800 gf.cmGearbox Efficiency80%~90%65%~70%55%~60%Application
Certification
Customer Evaluation
Our Company
HangZhou Shunli Motor Co. Ltd has been established in 2005. It’s a high-tech enterprise integrating the research, development, production and sales of various kinds of micro DC motor, geared motor, planetary geared motor, shade pole geared motor and special gearbox motor. Products are widely used in automobiles, communications equipment, V2HH6 industrial right angle gearbox transmission gearbox reducer for Steel industry smart home, medical equipment, intelligent security, household appliances, western kitchen equipment, machinery and electronics and other high-end transmission structures, products are exported to more than 50 countries and regions at home and abroad.

FAQ1.Q: Are you trading company or manufacturer?A: We’re factory. We specialize in micro dc motor and dc gear motor for more than 14 years.2.Q: What is the payment term for a new customer?A: We can draw up an Ali Assurance Order Online for our new customer, which can pay online with Master Card, Visa, etc. Customer also can pay with PayPal or TT etc.3.Q: I can’t find a suitable motor on your website, can you customize the motor for me?A: Yes, we can customize a suitable motor according to our customer’s requirements.4.Q: Do you have certificates for the motors?A: Yes, we have CE, FCC, ISO, Rubber Boot Kit Front Drive Shaft 04438-42180 443842180 – Cv Joint Boot For CZPT etc. If you have the other certificates requirement, we can apply it for you.5.Q: How is your Quality Control?A: We have professional checking staff on every production line process. After finishing the whole motor, we have the entire quality machine to test the motor. Such as Hardness Tester, 2.5D Image Tester, Salt Spray Chamber, Life Tester, Temperature Test Machine, and Noise tester etc.Recommend Product
Contact UsLooking forward to your feedback!
—————————Shunli Motor
HangZhou Shunli Motor Co., JSCC Motor 15W Standard Gear Motor 70YS15GV22 Reducer Gearbox 70GK25H Ltd

Choosing a Gearbox For Your Application

The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve one or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.
gearbox

Dimensions

Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.

Construction

The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on two gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.
gearbox

Working

A gearbox is a mechanical device that transmits power from one gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than one pair of gears, and a first gear may be used for the reverse. When a gear is shifted from one position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.

Advantages

Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than one with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.
gearbox

Application

While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.

China wholesaler Shunli Customizable Small Dc Gear Motor 13mm 25Rpm 30Rpm 60Rpm Low Rpm 12v Gear Motor With Gearbox Reducer  with Best SalesChina wholesaler Shunli Customizable Small Dc Gear Motor 13mm 25Rpm 30Rpm 60Rpm Low Rpm 12v Gear Motor With Gearbox Reducer  with Best Sales

in Rasht Iran (Islamic Republic of) sales price shop near me near me shop factory supplier DC Gear Motor for Money-Counting Machine manufacturer best Cost Custom Cheap wholesaler

  in Rasht Iran (Islamic Republic of)  sales   price   shop   near me   near me shop   factory   supplier DC Gear Motor for Money-Counting Machine manufacturer   best   Cost   Custom   Cheap   wholesaler

Thanks to our sincerity in offering greatest provider to our consumers, comprehending of your wants and overriding feeling of accountability towards filling ordering demands, We will offer very best companies and large good quality goods with all sincerity. specialize in energy transmission goods, CATV items, mechanical seal, hydraulic and Pheumatic, and marketing merchandise. DC EPT EPT for Funds-Counting EPTT
supr EPT motor

motor specification:

Design RATED VOLTAGE NO LOAD AT MAXiHu (West EPT) Dis.MUM Starting
Recent Speed Current Velocity TORQUE OUTPUT EPTT Recent TORQUE
V mA rpm mA rpm g.cm W mA g.cm
N20-1210SPG-06350 six. twenty 33 62 25 245 .06 190 one thousand
N20-1210SPG-5718 6. fifty 70 200 fifty five 480 .27 800 2400

EPTT specification:

REDUCTION RATIO ten 20 thirty 50 sixty three one hundred 150 210 250 298 340 380 a thousand
L(mm) nine 9 nine nine 9 nine 9 9 9 nine 9 9 twelve
Course OF ROTATION CCW CCW CCW CCW CCW CCW CCW CW CW CW CW CW CW

2.Manufacturing Circulation

three.EPTT Details

In current ten years, EPTTry has been focused to the manufacture of the motor merchandise and the principal items can be categorized into the adhering to sequence, namely DC motor, DC EPT motor, AC motor, AC EPT motor, Stepper motor, Stepper EPT motor, Servo motor and EPT actuator sequence.

Our motor items are broadly utilized in the fields of aerospace market, automotive market, finXiHu (West EPT) Dis.Hu (West EPT) Dis.al tools, EPTT EPT, EPTT EPTT and robotics, medical products, office products, EPTT EPTTry and EPTT business, giving clients trustworthy tailored remedies for driving and controlling.

four.Our Companies

one). EPTT Provider:

Rapid Reply

All enquiry or electronic mail be replied in 12 several hours, no hold off for your organization.

Expert Staff

Questions about items will be replied professionally, specifically, ideal tips to you.

Limited EPT time

Sample or small orEPTTsent in 7-fifteen days, bulk or EPT orEPTTabout thirty times.

Payment Selection

T/T, Western EPT,, L/C, and so forth, effortless for your company.

Before cargo

EPTTke photographs, ship to buyers for confirmation. Only verified, can be delivered out.

EPTuage Selection

Apart from EPT, you can use your very own language by email, then we can translate it.

2). Customization Support:EPT specification(no-load velocity , voltage, torque , diameter, sound, existence, testing) and shaft length can be tailor-made in accordance to customer’s requirements.

5.Package amp EPT

  in Rasht Iran (Islamic Republic of)  sales   price   shop   near me   near me shop   factory   supplier DC Gear Motor for Money-Counting Machine manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Rasht Iran (Islamic Republic of)  sales   price   shop   near me   near me shop   factory   supplier DC Gear Motor for Money-Counting Machine manufacturer   best   Cost   Custom   Cheap   wholesaler

in Sangli India sales price shop near me near me shop factory supplier Hot Sale 25mm 6 Volt DC Gear Motor for Door and Robot manufacturer best Cost Custom Cheap wholesaler

  in Sangli India  sales   price   shop   near me   near me shop   factory   supplier Hot Sale 25mm 6 Volt DC Gear Motor for Door and Robot manufacturer   best   Cost   Custom   Cheap   wholesaler

With a lot of years’ encounter in this line, we will be dependable by our positive aspects in aggressive cost, a single-time shipping and delivery, prompt reaction, on-hand engineering assistance and excellent after-revenue providers.In addition, all our generation procedures are in compliance with ISO9001 standards. We are looking forward to establishing effective company interactions with new customers all around the world in the long term. EPG has been efficiently licensed by ISO9002 Quality Administration Program, ISO9001 Top quality Management Technique, API certification, ISO/TS16949:2002 and ISO10012 measurement administration method. Sizzling Sale 25mm six Volt DC EPT EPT for Doorway and Robot

PG36M555 Series

voltage: 3VDC 6VDC 9VDC 12VDC 24VDC
Speed variety: 3000-9500rpm
EPTT: 3.three-13w
Standard apps: EPT air-conditioning valve, Amusement products, Coin
Refund gadgets, Grill, Oven, Peristaltic pumps, ATM bank
EPTT technique, Robot, Health care products, Place of work
EPT, EPTT EPTs, EPTT actuator.
Fat: 320~400g/PCS(approx)
EPTT information: CTN dimensions: 32X28XH26cm 40PCS/CTN G. W. 16Kgs

EPTT data:
Quantity of levels 1stages reduction two phases reduction three stages reduction 4 stages reduction five phases reduction
Reduction ratio three.seventy five.2 13.719.226.nine 50.971.299.5139 188264369516721 6699771367191126723736
EPTT length quot L quot mm 26.four 32.six 38.nine 45.3 fifty two.five
Max.Working torque three.0Kgf @ cm 6.0Kgf @ cm 8.0Kgf @ cm 12.0Kgf @ cm 20Kgf @ cm
Max. EPT breaking torque nine.0Kgf @ cm 18.0Kgf @ cm 24Kgf @ cm 36Kgf @ cm 60Kgf @ cm
Max. EPTing performance ninety% eighty one% 73% 65% 59%
EPT knowledge:
EPT name Rated volt.v No load Load torque Stall torque
Current Speed Present Speed Torque Output EPTT Torque Existing
mA r/min mA r/min gf @ cm W gf @ cm mA
RS-555123000 twelve le140 3000 le800 2200 150 3.three 600 3000
RS-555124500 12 le220 4500 le1200 3300 220 7.two 880 7800
RS-555126000 twelve le350 6000 le2000 4500 300 thirteen.five 1200 6000
RS-555243000 24 le70 3000 le400 2200 150 three.three 600 1600
RS-555244500 24 le110 4500 le600 3300 220 7.2 880 3000
RS-555246000 24 le180 6000 le1000 4500 three hundred 13.five 1200 4000
1This desk lists some motors parameters, others you should refer to specific parameters of rs-555.htm quot
2Afier connecting motor and EPTT which is named EPTmotor the output torque:motor torque X reduction ratio X EPTing efficiencyoutput pace:motor velocity / reduction ratio.
Notice:
1 EPTmotor named strategies: e . g . SG-555123000-ninety nine.5K EPT you should refer to the motor information RS-555123000.
EPTT make sure you refer to EPTT knowledge reduction ratio99.5 .Related to EPTmotor output velocity and torque you should
refer to motor information.
2 EPT can be installed wiEPTT magnetic encorder. encorEPTTparameters make sure you refer to me-37.htm .
3StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd output shaft soon after reducing: 8.0mm. other measurements of then output shaft can make as consumer ask for.
4Chart only for reference,merchandise shall prevail the entity.

EPTT Introduction

  in Sangli India  sales   price   shop   near me   near me shop   factory   supplier Hot Sale 25mm 6 Volt DC Gear Motor for Door and Robot manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Sangli India  sales   price   shop   near me   near me shop   factory   supplier Hot Sale 25mm 6 Volt DC Gear Motor for Door and Robot manufacturer   best   Cost   Custom   Cheap   wholesaler

in Samsun Turkey sales price shop near me near me shop factory supplier Industrial DC Electric Motors 12V 24V Low Speed Torque Gear Motor manufacturer best Cost Custom Cheap wholesaler

  in Samsun Turkey  sales   price   shop   near me   near me shop   factory   supplier Industrial DC Electric Motors 12V 24V Low Speed Torque Gear Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

Entire use has been produced of all types of advanced strategies and technologies to get to excelsior production. Maintaining in brain that very good service is the key to cooperating with consumers, we strive to fulfill large good quality expectations, provide aggressive charges and guarantee prompt delivery. Furthermore, WE CAN Generate Personalized VARIATORS, GEARED MOTORS, Electrical MOTORS AND OTHER HYDRAULIC Items In accordance TO CUSTOMERS’ DRAWINGS. EPTT DC Electric EPTs 12V 24V Lower Velocity Torque EPT EPT

Model:D59L-24v60w-50rpm

Sort 12v worm EPT motor
EPT Diameter 59mm
Voltage 12v 24v 36v 42v 48v 110v 220v
EPTT le60W
Torque le12N.M
Velocity le250RPM
EPT of ratio fifty six:1 28:one 70:one
EPT Modulus 70:1 M=.8
56:1 28:1 M=1
EPT of EPT Plastic /brass
OEM/ODM Provider Accept
Use Electric powered clothing rack ,electric adjustable desk ,blenEPTTEPTT,lifter EPTT,XiHu (West EPT) Dis.Hu (West EPT) Dis.age door opener,electric EPT lifting ,other electric powered tools .

HangEPT HuiEPTT EPT amp EPTT EPTT,Ltd is a subsidiary of HangEPT Wewin EPT EPTT,Ltd.The manufacturing unit is situated in EPTTdu,HangEPT,we can design and manufacture of motors in accordance to all our customers’ demands so much,we can manufacture about sixty,000 motors for every thirty day period.

Our principal market place:

Europe,The united states and Asia,incXiHu (West EPT) Dis.Hu (West EPT) Dis. United Kingdom, Germany, EPTT, France, Sweden, United State,Brazil,India,Korea and so on.

EPTT Rewards:

1. Big manufacturing ability, quick shipping.

two. Rigorous QC inspecting policies: all products must be a hundred% inspected prior to delivery.

three. OEM/ODM companies are offered

four. 24 hours online service.

five. Prompt quotation for your inquiry

6. EPTT,trustworthiness and EPTT item life.

seven. Skilled producer gives competitive value.

eight. Diversified prosperous skilled expert personnel.

Far more Purposes:

Car EPTTlator ,XiHu (West EPT) Dis.Hu (West EPT) Dis.age door opener ,gate operator, wheelchair ,electric powered vehicle ,drinking water pump ,oil pump,vending EPTT,sewing EPTT, welding EPTT, place of work EPTT tools,ground poEPTTr,EPT raise,stair elevate,hospital mattress , EPT pump electric forklift.

RFQ:

Q: Are you investing company or maker ?

A: We are Integration of market and trade, with over 20 years expertise in DC worm EPT motor. Our business have accumulated skilled generation line, total management and EPTTful research assistance, which could match all of the customers’ requirements and make them gratification.

Q: What is your major merchandise?

DC EPT: EPT motor, Sq. motor, Stepped motor, and EPT motor
-EPT products: Wire feeder, EPT rod, EPT Torch, Earth clamp, Electrode holder, and Rectifier

Q: What if I will not know which DC motor EPT?

A: Will not be concerned, Deliver as significantly data as you can, our group will assist you locate the rigEPTT one particular you are seeking for.

Q: What is your terms of payment ?

A: Payment lt=1000USD, a hundred% in EPT. Payment gt=1000USD, 30% T/T in EPT ,balance before shippment.
If you have an additional issue, pls truly feel cost-free to contact us as under:

Q: How to shipping and delivery:

A: By sea – Customer appoint EPTTer, or our product sales staff discover ideal forwarEPTTfor buyers.

By air – Buyer offer EPT express account, or our revenue staff find appropriate specific for consumers. (Mainly for sample)
Others – Really,samples send out by DHL,UPS, TNT and Fedex etc. We arrange to supply goods to some area from EPTT appointed by purchasers.

Q: How EPTT is your shipping and delivery time?
A: EPTTly it is 5-10 daEPTTif the products are in stock. or it is 15-twenty daEPTTif the merchandise are not in stock, it is according to amount.

  in Samsun Turkey  sales   price   shop   near me   near me shop   factory   supplier Industrial DC Electric Motors 12V 24V Low Speed Torque Gear Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Samsun Turkey  sales   price   shop   near me   near me shop   factory   supplier Industrial DC Electric Motors 12V 24V Low Speed Torque Gear Motor manufacturer   best   Cost   Custom   Cheap   wholesaler