China Drive Gear Box Torque 7840n. M-18000n. M for Various Industry Machinery gearbox drive shaft

Solution Description

Push Equipment box torque 7840N.m-18000N.m For Various Business Equipment

Item Description


Factors:
1. Housing: Forged Iron
2. Gears: Helical Gears
three. Enter Configurations:
Geared up with Electrical Motors
Strong Shaft Enter
IEC or NEMA Motor Flange
4. Relevant Motors:
Single Period AC Motor, 3 Section AC Motor
Brake Motors
Inverter Motors
Multi-pace Motors
Explosion-proof Motor
Roller Motor
5. Output Configurations:
Solid Shaft Output

Comprehensive Photos

Models:
R Sequence (Foot-mounted): R18~R168
RS Sequence (Foot-mounted, Reliable Shaft Enter)
RF Collection (Flange-mounted): RF18~RF168
RFS Sequence (Flange-mounted, Reliable Shaft Enter)
RX Sequence (1 Phase, Foot-mounted): RX38~RX158
RXS Series (1 Phase, Foot-mounted, Reliable Shaft Enter)
RXF Series (1 Phase, Flange-mounted): RXF38~RXF158
RXFS Sequence (1 Phase, Flange-mounted, Solid Shaft Enter)
RM Sequence (agitator gearboxes): Specifically made for agitating apps
Attributes:
one. Compact structure, modular design and style
two. Single-phase, two-stage and 3-phase dimensions
three. Large reduction ratio and torque density
four. Lengthy support daily life
5. Can be mixed with other sorts of gearboxes (Such as R Collection, K Collection, F Collection, S Series, UDL Collection)
Parameters:
two Stage or 3 Phase
Installation:
Foot Mounted
Flange Mounted
Lubrication:
Oil-tub and Splash Lubrication
Cooling:
All-natural Cooling
 

Product Parameters

Designs Output Shaft Dia. Input Shaft Dia. Energy(kW) Ratio Max. Torque(Nm)
R/RF18 20mm .18~.75 three.eighty three~74.eighty four eighty five
R/RF28 25mm 16mm .18~three three.37~135.09 130
R/RF38 25mm 16mm .18~three three.forty one~134.eighty two 200
R/RF48 30mm 19mm .18~5.five three.83~176.88 300
R/RF58 35mm 19mm .eighteen~7.five four.39~186.89 450
R/RF68 35mm 19mm .eighteen~7.five four.29~199.eighty one 600
R/RF78 40mm 24mm .18~11 five.21~195.24 820
R/RF88 50mm 28mm .55~22 five.36~246.54 1550
R/RF98 60mm 38mm .55~30 4.49~289.six 3000
R/RF108 70mm 42mm 2.2~forty five five.06~245.5 4300
R/RF138 90mm 55mm five.5~fifty five 5.fifty one~223.34 8000
R/RF148 110mm 55mm 11~90 5.00~163.forty six 13000
R/RF168 120mm 70mm 11~one hundred sixty eight.77~196.41 18000

one Stage

Types Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
RX/RXF38 20mm 16mm .18~1.one one.6~3.seventy six 20
RX/RXF58 20mm 19mm .18~5.five one.3~5.5 70
RX/RXF68 25mm 19mm .18~7.5 1.4~6.07 135
RX/RXF78 30mm 24mm 1.1~11 one.forty two~5.sixty three 215
RX/RXF88 40mm 28mm three~22 1.39~6.44 400
RX/RXF98 50mm 38mm five.5~thirty one.forty two~5.82 600
RX/RXF108 60mm 42mm 7.5~forty five 1.forty four~6.65 830
RX/RXF128 75mm 55mm seven.5~90 1.fifty six~6.47 1110
RX/RXF158 90mm 70mm eleven~132 1.63~6.22 1680

Packaging & Shipping and delivery

Packaging & Shipping and delivery
Speed Reducer Worm Gearbox Packaging Specifics:Plastic Bags, Plywood Cases
Port:ZheJiang /HangZhou

Organization Profile

one.Much more than 35 a long time experience in R&D and producing, export gear motors & industrial gearboxes.
two. Standardization of the gearbox series
3. Strong design functionality for huge energy & personalized gearboxes.
four. Substantial top quality gearboxes and proven options company.
five. Rigid high quality manage approach, stable top quality.
6. Much less than 2% of the top quality complaints.
seven. Modular design, quick supply time.
eight. Rapid response & professional providers.

Client checking out:

Right after Product sales Support

Pre-sale providers one. Decide on tools product.
2.Design and style and manufacture items according to clients’ specific prerequisite.
3.Teach complex individual for customers
Services in the course of promoting 1.Pre-verify and accept merchandise in advance of shipping and delivery.
2. Aid customers to draft resolving strategies.
After-sale services 1.Support clientele to put together for the first building plan.
two. Prepare the 1st-line operators.
3.Consider initiative to eradicate the difficulty quickly.
4. Offer specialized exchanging.

FAQ

1.Q:What sorts of gearbox can you create for us?

A:Principal products of our business: UDL series velocity variator,RV sequence worm gear reducer, ATA collection shaft mounted gearbox, X,B series gear reducer,
P sequence planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred versions and 1000’s of technical specs
2.Q:Can you make as per custom drawing?
A: Sure, we supply custom-made services for clients.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the deal.70% prior to shipping and delivery
four.Q:What is your MOQ?
A: 1 Set

If you are intrigued in our product, welcome you contact me.
Our crew will support any want you might have.

Application: Motor, Machinery, Industry
Hardness: Hardened
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Helical Gear
Step: Single-Step

###

Customization:

###

Models Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
R/RF18 20mm 0.18~0.75 3.83~74.84 85
R/RF28 25mm 16mm 0.18~3 3.37~135.09 130
R/RF38 25mm 16mm 0.18~3 3.41~134.82 200
R/RF48 30mm 19mm 0.18~5.5 3.83~176.88 300
R/RF58 35mm 19mm 0.18~7.5 4.39~186.89 450
R/RF68 35mm 19mm 0.18~7.5 4.29~199.81 600
R/RF78 40mm 24mm 0.18~11 5.21~195.24 820
R/RF88 50mm 28mm 0.55~22 5.36~246.54 1550
R/RF98 60mm 38mm 0.55~30 4.49~289.6 3000
R/RF108 70mm 42mm 2.2~45 5.06~245.5 4300
R/RF138 90mm 55mm 5.5~55 5.51~223.34 8000
R/RF148 110mm 55mm 11~90 5.00~163.46 13000
R/RF168 120mm 70mm 11~160 8.77~196.41 18000

###

Models Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
RX/RXF38 20mm 16mm 0.18~1.1 1.6~3.76 20
RX/RXF58 20mm 19mm 0.18~5.5 1.3~5.5 70
RX/RXF68 25mm 19mm 0.18~7.5 1.4~6.07 135
RX/RXF78 30mm 24mm 1.1~11 1.42~5.63 215
RX/RXF88 40mm 28mm 3~22 1.39~6.44 400
RX/RXF98 50mm 38mm 5.5~30 1.42~5.82 600
RX/RXF108 60mm 42mm 7.5~45 1.44~6.65 830
RX/RXF128 75mm 55mm 7.5~90 1.56~6.47 1110
RX/RXF158 90mm 70mm 11~132 1.63~6.22 1680

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.
Application: Motor, Machinery, Industry
Hardness: Hardened
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Helical Gear
Step: Single-Step

###

Customization:

###

Models Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
R/RF18 20mm 0.18~0.75 3.83~74.84 85
R/RF28 25mm 16mm 0.18~3 3.37~135.09 130
R/RF38 25mm 16mm 0.18~3 3.41~134.82 200
R/RF48 30mm 19mm 0.18~5.5 3.83~176.88 300
R/RF58 35mm 19mm 0.18~7.5 4.39~186.89 450
R/RF68 35mm 19mm 0.18~7.5 4.29~199.81 600
R/RF78 40mm 24mm 0.18~11 5.21~195.24 820
R/RF88 50mm 28mm 0.55~22 5.36~246.54 1550
R/RF98 60mm 38mm 0.55~30 4.49~289.6 3000
R/RF108 70mm 42mm 2.2~45 5.06~245.5 4300
R/RF138 90mm 55mm 5.5~55 5.51~223.34 8000
R/RF148 110mm 55mm 11~90 5.00~163.46 13000
R/RF168 120mm 70mm 11~160 8.77~196.41 18000

###

Models Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
RX/RXF38 20mm 16mm 0.18~1.1 1.6~3.76 20
RX/RXF58 20mm 19mm 0.18~5.5 1.3~5.5 70
RX/RXF68 25mm 19mm 0.18~7.5 1.4~6.07 135
RX/RXF78 30mm 24mm 1.1~11 1.42~5.63 215
RX/RXF88 40mm 28mm 3~22 1.39~6.44 400
RX/RXF98 50mm 38mm 5.5~30 1.42~5.82 600
RX/RXF108 60mm 42mm 7.5~45 1.44~6.65 830
RX/RXF128 75mm 55mm 7.5~90 1.56~6.47 1110
RX/RXF158 90mm 70mm 11~132 1.63~6.22 1680

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China Drive Gear Box Torque 7840n. M-18000n. M for Various Industry Machinery     gearbox drive shaft	China Drive Gear Box Torque 7840n. M-18000n. M for Various Industry Machinery     gearbox drive shaft
editor by czh 2023-01-16