Product Description

WPDO speed reducer,; worm gear box

Model NO.;:; WP series                       Manufacturing Method:; Cast Gear
Toothed Portion Shape:; Spur Gear          Type:; Worm and Wormwheel
Gearing Arrangement:; Worm                 Output Torque:; 19-2745n.;M
Rated Power:; 1.;5kw                         Input Speed:; 1400
Output Speed:; 23~140rpm                   Place of Origin:; ZHangZhoug,;China
Model Number:; Wpdo                        Brand Name:; EED
Color:; Green,;Yellow or According to Custom  Extra Service:; OEM Welcome!!!
Specification:; SGS,; ISO9001                 Origin:; ZHangZhoug,; China
HS Code:;                      Worm gear box

1.; Widely used in turbines,; shaft liners and axletrees,; good resistance to wearing,; with high precision in dimensions,; lower noise,; advanced centric running castings
2.; Without vent and highly precision
3.; The whole structure is compact and the weight is larger

1.; Notice of installation

1.;1 Thebase-plate must be plane and stoutness,; and the base-plate must be screwed downand shockproof.;
1.;2 Theconnecting shaft of prime mover,; reducer and operation device must be coaxialinstallation.;
1.;3 Thediameter tolerance zone of input and output shaft is H6,; the holes of fittings(such as couplings,; belt-pulley,; sprocket wheel and so on); must properly matethe shaft,; which prevents bearing from breakage because of over-loose mate.;

1.;4 Driverssuch as sprocket wheel and gear must be fitted close to bearings in order toreduce bending stress of hanging shaft.; 1.;5 Whiteassembling motor of WPD reducer,; it is necessary that proper amount of butterapplies to the worm shaft input hole and keyway,; avoiding assembling tootightly and rusting after using for a long time.; 1.;6 WhenOrdering or using all kinds of WPD type,; if the motor weight is binger than thecommon,; supporting set is required.;

2.; Notices of usage

2.;1 Before using,; please check carefully whether the reducer model,; distance,; ratio,; input connecting method,; output shaft structure,; input and output shaftdirection and revolving direction accord with requirement.;

2.;2 According to the requirement of selecting lubricant oil in the productmanual,; please fill proper category and brand lubricant.; And then screw on thevent-plug; Unlock the small cone-plug of vent-plug.; Only after doing these,; reducer is already for starting up running.; The proper brand and adequatelubricant oil is required,; replacing oil in time conforming to the request ofproduct manual is also necessary,; especially after using first 100 hours,; it isrequired refilling new oil.;

2.;3 Whenabnormal circumstances occur,; please stop and check reducer per solutions andreasons for faults of reducer (allowable highest oil temperature is 95,; under this temperature limit,; ifoil temperature no more goes up,; please let reducer continue running);